FAQs
For 20 Kg bag of LATICRETE® 313, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
For installation of metal tiles on any substrate, we recommend using PUA 212® - The Versatile Adhesive.
Yes. But only for floor areas for external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 313 has the ability to accommodate such movements in small format tiles when spacers are provided.
Yes, we can install small format natural stones using our LATICRETE® 313. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
The maximum height is 10 ft when you want to install tiles using LATICRETE® 313. For installation of tiles more than 10 ft height, we recommend using LATICRETE® 325 & above.
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
No. It is mandatory to have spacing between the tiles when installed on the internal wall. The spacers are important to accommodate such movements.
Tile adhesive is a ready-to-use bonding material formulated for stronger, more flexible tile installation than traditional tile cement. It provides better adhesion, reduced wastage, and improved durability.
Polymer-modified tile adhesive is typically best for vitrified tiles, as it offers the higher bond strength needed for their low-porosity surface.
Yes, tile adhesive is ideal for wall tile installation because it offers strong grip, reduced sagging, and easier application compared to cement mortar.
