LATICRETE® 325 High Flex
It is a high polymer-modified, high-strength adhesive for versatile tile and natural stone installations.
LATICRETE® 325 High Flex
It is a high polymer-modified, high-strength adhesive for versatile tile and natural stone installations.
Colour:
Grey & White
SKU:
Compliance:
ANSI: 118.4 ET
EN 12004/ISO 13007: C2TE
IS 15477:2019: TYPE 3 Adhesive
Product Overview
LATICRETE® 325 High Flex is a high-strength, polymer-modified adhesive designed for interior and exterior floor and wall installations. Suitable for various types of tiles, it provides excellent bond strength and durability, even in wet areas like swimming pools and washrooms.
Features & Benefits
1
Single Component
Easy to use- just add water, mix and apply
2
Shock Resistant
Durable with excellent shock resistance
3
Polymer Modified Adhesive
High bond strength and versatile application
Product Details
Specifications
EN 12004/ISO 13007: C2TE
IS 15477:2019: TYPE 3 Adhesive
VOC: Practically Nil
Substrates
Concrete
Cement Mortar Beds
Ceramic Tile
Stones
Concrete Masonry Units (CMU)
Cement Plaster
Brick Masonry
Cement Terrazzo
Gypsum Wall Board*
Substrates Details
*Consult the backer board manufacturer's data sheet for the specific recommendations.
Adhesive Coverage Calculator
LATICRETE 325 Shear Wall Adhesive
Number of Adhesive Bags Required
0 Bags
Adhesive Bed Thickness
6 mm
Adhesive Coverage
0 sq. ft. per bag
Bag Size
0 kg
*Please select the adhesive.
FAQs
LATICRETE® 325 High Flex is high polymers and cement based thin set adhesive which is mixed with water and used for tile installation in internal and external areas.
You can use LATICRETE® 325 High Flex for internal and external areas like residential floors & walls to install clay/ ceramic/ vitrified/ glass mosaic tiles.
For 20 Kg bag of LATICRETE® 325 High Flex, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
For installation of metal tiles on any substrate, we recommend using PUA 212® - The Versatile Adhesive.
The maximum size of ceramic / vitrified tile for interior application is 1200mm X 1200mm and for exterior application is 600mm X 600mm. If you are installing tiles larger than this size, we recommned using LATICRETE® 335 Super Flex and higher.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 325 High Flex has the ability to accommodate such movements.
Yes, you can install natural stones with LATICRETE® 325 High Flex. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
The maximum height is 50 ft when you want to install tiles using LATICRETE® 325 High Flex. For installation of tiles more than 50 ft height, we recommend using LATICRETE® 345 Super Flex.
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
No. It is mandatory to have spacing between the tiles when installed on external façade. The thermal movements are very high and spacers are must to accommodate such movements.
You have to use LATICRETE® cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series unsanded grout) mixed with LATICRETE® 1776 grout admix plus for filling these spaces (Grout joints) between tiles.
