FAQs

You can use LATICRETE® 600 Series grout mixed with LATICRETE® 1776 grout admix plus, for internal and external areas like residential, commercial, Industrial floors and walls to install in the joints of ceramic / vitrified/ glass mosaic tiles and engineered marble/quartz stones, natural stones etc.

You can use LATICRETE® 500 Series grout mixed with LATICRETE® 1776 grout admix plus, for internal and external areas like residential, commercial, Industrial floors and walls to install in the joints of ceramic / vitrified/ glass mosaic tiles and engineered marble/quartz stones, natural stones etc. where joint width is more than 3mm.

Yes. When you want to fill tile joints of water bodies and pools with SP-100™, you can do so by leaving one joint at every 12 ft distance in both directions. These joints can be subsequently filled using a silicone sealant. For further details, seek advice from MYK LATICRETE team member.

Yes. This is an ideal product for industrial tile / stone installation on floors and walls (Internal). This product offers excellent chemical resistance to different chemicals like acids, alkalis etc. making this most suitable for industries like pharma, food, chemical etc. This is also most suitable for hospital operation theatres, pathology labs and clinical laboratories. For all these applications, one needs to use Industrial Epoxy Grout LATAPOXY® 2000, to fill the tile joints.

You have to use LATICRETE® cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series unsanded grout) mixed with LATICRETE® 1776 grout admix plus for filling these spaces (Grout joints) between tiles.

LATICRETE® 345 Super Flex is very high polymers and cement based thin set adhesive which is mixed with water and used for tile /stone installation in internal and external areas.

For 20 Kg bag of LATICRETE® 345 Super Flex, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.

Any size of tile above 1200mm X 1200mm can be installed with LATICRETE® 345 Super Flex.

Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 345 Super Flex has the ability to accommodate such movements.

Yes, you can install natural stones with LATICRETE® 345 Super Flex. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
Enquire Now