FAQs
Tile adhesive consumption generally ranges from 4-6 sq ft per kg, depending on tile size, substrate condition, and application thickness.
Yes, tile adhesive provides stronger bonding, better flexibility, thinner application, and improved crack resistance compared to conventional cement mortar.
LATICRETE® 335 Maxi is polymer modified adhesive which is mixed with water and used for tile installation in internal floor & wall areas and external floor areas.
You can use LATICRETE® 335 Maxi for internal floor & wall and external floor areas like residential floors, walls to install ceramic / vitrified tiles of sizes upto 600 mm X 600 mm
For 20 Kg bag of LATICRETE® 335 Maxi, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
Yes. But only for floor areas for external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 335 Maxi has the ability to accommodate such movements in small format tiles when spacers are provided.
Yes, we can install small format natural stones using our LATICRETE® 335 Maxi. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
The maximum height is 10 ft when you want to install tiles using LATICRETE® 335 Maxi. For installation of tiles more than 10 ft height, we recommend using LATICRETE® 325 & above.
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
No. It is mandatory to have spacing between the tiles when installed on internal wall. The spacers are important to accommodate such movements.
