LATICRETE® 111 + LATICRETE® 4237
A high-performance thin set mortar or tile adhesive designed for strong, flexible bonding of large format tiles and stones on various substrates, both interior and exterior.
LATICRETE® 111 + LATICRETE® 4237
A high-performance thin set mortar or tile adhesive designed for strong, flexible bonding of large format tiles and stones on various substrates, both interior and exterior.
Colour:
Grey & White
Compliance:
ANSI: A118.4 ET, EN 12004 or ISO 13007 for C2TE S1
IS: 15477: 2019 TYPE 3 TS1 Adhesive
Product Overview
LATICRETE® 111 Crete Filler Powder combined with LATICRETE® 4237 High-Performance Latex Admix forms a high-strength, flexible adhesive ideal for fixing large format tiles and stones. This system is suitable for both interior and exterior applications and can be used on concrete, masonry and plaster.
Features & Benefits
1
Superior Bond Strength
Provides strong bond strength for large format tiles and stones
2
Flexible and Shock & Impact Resistant
Durable with excellent resistance to water, impact and shock
3
Rated for extra heavy traffic
Highly rated for heavy traffic conditions with superior resistance
4
Versatile Application
Suitable for interior and exterior use; Supports up to 12 mm bed thickness for strong adhesion
Product Details
Specifications
IS: 15477 : 2019 TYPE 3 TS1 Adhesive
VOC: Practically Nil
IS 15477: 2019: TYPE 3 TS1 Adhesive
VOC: Very Low
Substrates
Concrete
Concrete Masonry Units (CMU)
Concrete MIVAN
VDF
Cement Mortar Beds
Cement Plaster
Ceramic Tile
Vitrified Tile
Natural Stone
Calcium Silicate Board**
Brick Masonry
Cement Backer Board**
Cement Terrazzo
Gypsum Wall Board**
Substrates Details
**Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.
FAQs
You can use LATICRETE® 111+ LATICRETE® 73 for internal and external areas like residential floors, walls to install ceramic / vitrified/ glass mosaic tiles.
LATICRETE® 111 cement based Crete filler powder which is mixed with LATICRETE® 4237 Latex Admix liquid to form highly flexible thin set adhesive and used for tile / stone installation in internal and external areas.
Not true. In fact it is easier with two component products as there is no water mixed at site. The performance of single powder product depends on the quality of water mixed in it. Many times the water quality is bad on building sites and contaminants in it affect the performance of single powder adhesives.
For 20 Kg bag of LATICRETE® 111 Crete filler powder, one needs 5 to 6 Litres of LATICRETE® 4237 liquid depending upon the consistency of mix required and ambient environmental conditions.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 111+LATICRETE® 4237, has very high ability to accommodate such movements
Yes, you can install natural stones with LATICRETE® 325 High Flex. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
There maximum height is 250 ft when you want to install tiles using LATICRETE® 111+ LATICRETE® 423For installation of tiles more than 250 ft height, please seek advice from MYK LATICRETE team member.
No. It is mandatory to have spacing between the tiles when installed on external façade or floors. The thermal movements are very high and spacers are must to accommodate such movements.
You can use cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series un-sanded grout) mixed with LATICRETE® 1776 grout admix plus for filling these spaces. You can also use STELLAR™ Grout or SP-100™ DUO.
No, do not use cement based adhesives for installation of metal tiles. We recommend using PUA 212® for such installations.
