LATICRETE® 307 is cement

based thin set adhesive which is mixed with water and used for tile installation in internal areas.

You can use LATICRETE® 307 for internal areas like residential floors, walls to install ceramic tiles.

For 20 Kg bag of LATICRETE® 307, one needs 5 to 6 Liters of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.

For vitrified tiles or Glass mosaic tiles, one has to choose high polymer adhesives like LATICRETE® 252 or above. If you want to install vitrified tiles using LATICRETE® 307, mix this powder with LATICRETE® 73 Latex admix instead of mixing with water.

The maximum size of ceramic tile is 450mm X 450mm for installation with LATICRETE® 307 + water. If you are installing tiles larger than this size ask MYK LATICRETE team member for a suitable thin set adhesive

For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. Hence it is recommended to use LATICRETE® 73, latex admix instead of water with LATICRETE® 307, to install tiles on external surfaces.

When you want to install Natural stones with LATICRETE® 307, seek advice from MYK LATICRETE team member as natural stones are varied and have absorption which may create problems like staining of stones, ugly patches, picture framing etc.,