A high-performance, stain resistant, germ & water resistant epoxy grout for durable and easy-to-clean tile joints, used in internal areas. This grout is a proven product over 50 years.

There are three pack sizes available: 1 Kg, 5 Kg & 10 Kg.

You can use SP-100™, epoxy grout for internal and external (Covered) areas like residential, commercial, industrial floors and walls to install in the joints of ceramic / vitrified/ glass mosaic/ metal tiles and engineered marble/ quartz stones, natural stones etc. One can use epoxy grout in kitchens, wash rooms, swimming pools, food courts, corridors, halls and water bodies.

Yes. We have one product called Dazzle™ grout which is exactly like SP-100™ in its performance but available with variants like Gold, Silver and Copper. In each variant, there are 10 attractive colors available which makes the total color possibility of 30 colors.

No water should be mixed with this product. It is a resin based pre-packed grout which has three components, namely PartA, Part B and filler powder Part C. Only these components should be mixed to make grout which is easy to apply and clean.

The following preparation must be done before application of SP-100™ grout:

• Clean the surface of the tiles and joints free of dust and debris with wet cloth or sponge. Remove spacers from the joints.
• Find out if the tiles were washed with acid based cleaners. If washed with acid based cleaners, wash the tiles again with plenty of clean water to remove any acidic remains in the joints.
• Don’t allow water to stand in the grout joints prior to grouting. Allow the joints to become dry.
• Check if all the tools and sufficient grout material is available for completion of job without any disturbance.
• Cordon off the area and don’t allow any traffic after cleaning the joints

The following precautions are very important and critical while application of SP-100™, epoxy grout:

• Don’t do part mixing. The grout components are pre-packed and need to be used completely. For small areas, use small packs. Mix liquid components (Part A and Part B) first and then add filler powder to the already mixed liquid.
• Do not mix the grout in dirty pails, buckets. Always use clean pail to get the best results.
• Use gloves while mixing and applying the epoxy grout. A pair of gloves is provided in the grout pack.
• Don’t use putty blades for application of grout: Putty blades are metallic blades which will leave scratches on the tile surface. ALWAYS USE RUBBER FLOATS so that the tile doesn’t get scratched.
• Don’t allow any other works like plumbing, electrical fittings, plastering, tiling or painting to be done in the grouting area while applying the epoxy grout. If there is dust in the air, it settles down on the grouted joint which will be difficult to remove. Don’t allow any traffic other than people who are working with epoxy grout.
• Start initial cleaning with the scrubber provided in the kit in about 45 minutes time from the time of filling up of joints. If not done, it is difficult to remove the grout haze and excess grout after couple of hours. Final cleaning must be carried out after 24 hours from the time of first cleaning.
• Do not smoke while working with the epoxy grout. Do not allow any fire producing elements to the site while working with epoxy grout.
• Always use potable quality clean water for first and final cleaning of the grout joints.

Foot traffic is allowed after 24 hours from the final cleaning of the grout. Heavy traffic is allowed only after 7 days from the day of final cleaning of grout joints. For water bodies, it is recommended to fill water only after 7 days from the day of final cleaning.

The minimum width of joint should be 2 mm and maximum size (width) of joint should be 12 mm for installation with SP-100™. If you are installing SP-100™ in joints wider than 12mm ask MYK LATICRETE team member for a suitable epoxy grout.

No. One can use SP-100™ for covered areas only. This product is not suitable for external facades and floors if they are not covered.

Yes. When you want to fill tile joints of water bodies and pools with SP-100™, you can do so by leaving one joint at every 12 ft distance in both directions. These joints can be subsequently filled using a silicone sealant. For further details, seek advice from MYK LATICRETE team member.

The biggest advantage is it is 100% stain proof and does not allow any stains to form on joints due to spillage of different food materials, beverages etc. Besides this, being a solid epoxy grout, it does not crack, powder or disintegrate with time. It can be safely used in kitchens and bathrooms as it is anti-fungal and anti bacterial, hence makes the floors and walls very hygienic.

SP-100™, when used in swimming pools resists the attack of chlorination of water in the pool. Normal cement based grouts disintegrate due to this chlorination of swimming pool water. Our wash rooms are usually cleaned with locally purchased acids which immediately attack the joints. If the joints are filled with cement or cement based grout, they get neutralized in a short period and turn black. Later you will see the cement gone and joints open up leading to all kinds of problems like water leakages and paints peeling off. All this can be avoided with SP-100™ as it efficiently resists the attack of acids used for cleaning the wash rooms.

SP-100™ stain free epoxy grout is available in 40 attractive colors to suit your taste of choice of tiles. Please ask for MYK LATICRETE CHIP CLIP which is used for selecting the required color.

Though the product is easy to use, it is always recommended to have an experienced application contractor engaged for installation of SP-100™ grout. Follow all the precautions specified above while applying the epoxy grout. Seek the help of MYK LATICRETE team member for application.