Nov 2, 2026

How to Clean Natural Stone at Home

How to Clean Natural Stone at Home

Natural Stone Cleaning: The Dos and Don’ts 

A practical guide to caring for marble, granite, kota, sandstone, slate, travertine and other natural stones in Indian homes. 

Stone is an integral part of India’s architectural landscape. Think of granite kitchen counters in Bengaluru, kota stone verandahs in Rajasthan, Kadappa staircases in Andhra Pradesh, Jaisalmer sandstone facades and polished marble in homes across the country. 

Each stone has its own characteristics and responds differently to cleaning products, moisture and everyday wear. Stone damage often results not from one dramatic incident, but from small, repeated maintenance mistakes: using the wrong cleaner, leaving spills unattended, using too much water or applying an unsuitable protective treatment. This guide explains what to do—and what to avoid—when caring for the stone surfaces in your home. 

First, know your stone 

Natural stones can broadly be classified as calcareous or siliceous, based on their mineral composition. This distinction matters because it influences how a stone reacts to cleaning chemicals. 

• Calcareous stones: Marble, limestone, kota and travertine contain calcium carbonate and are particularly sensitive to acids. Lemon juice, vinegar and acidic household cleaners can etch their surfaces. 

• Siliceous stones: Granite, quartzite and many varieties of sandstone and slate are generally more resistant to common household acids. However, their mineral composition can vary, and some may contain acid-sensitive minerals. Even durable stones can be affected by harsh chemicals or unsuitable treatments. 

Note: Kadappa is commonly marketed as a limestone and should be treated as acid-sensitive unless the specific stone’s composition is established. 

Stone  Common uses in India  Acid sensitivity  Cleaning priority
Marble  Living rooms, pooja rooms, floors and stairs High  Use a neutral, stone-compatible cleaner; wipe spills promptly.
Kota stone /
limestone
Verandahs, corridors and utility areas High  Avoid acidic cleaners; manage moisture and stains.
Granite  Kitchen counters, floors and stairs Generally low  Use a stone-compatible cleaner; remove oil spills promptly.
Sandstone  Facades, courtyards and garden paths Variable  Clean gently; manage moisture, algae and surface wear.
Slate / Kadappa  Floors, stairs and outdoor paving Variable; treat
Kadappa as
acid-sensitive
Use a suitable cleaner; inspect for flaking and staining.
Travertine  Feature walls, bathrooms and floors High  Use a neutral cleaner; maintain filled voids where applicable.

Not sure which stone you have? Check the stone supplier’s specifications or consult a stone-care professional. If you have an offcut or sample piece, an acid-sensitivity test may help identify calcareous stone. Avoid experimenting on an installed or polished surface.

The dos 

• Do use a non-acidic, stone-compatible cleaner. CLENZA Marble & Stone Cleaner is formulated for a range of natural and engineered stone surfaces. Always check the product label and technical data sheet for suitable substrates, dilution and application instructions. 

• Do dry-mop regularly. Fine grit and dust can act like abrasives under footwear, contributing to scratches and dull traffic paths. 

• Do blot spills promptly. Blot rather than vigorously wiping, particularly when dealing with oil or coloured liquids, to avoid spreading the spill. 

• Do use doormats and felt pads. Place doormats at entrances and felt pads under furniture legs and planters to reduce scratching. 

• Do consider sealing porous stones. A suitable penetrating sealer from the MYK LATICRETE Stone Care range can improve resistance to staining by reducing absorption. Select the sealer for the stone and its finish, and follow the manufacturer’s instructions. 

• Do test the sealer periodically. Place a few drops of water on a clean, dry area. If the stone darkens as water is absorbed, the protective treatment may need reapplication. Follow the sealer manufacturer’s testing and resealing guidance. 

• Do rinse outdoor stone where the cleaning product requires it. Remove cleaning residues and loosened dirt as directed, and allow the surface to dry. 

Sealing can improve stain resistance, but it does not make stone waterproof or protect it from acid etching. Not every stone or finish needs the same treatment. 

The don’ts 

• Don’t use acidic cleaners such as vinegar, lemon-based cleaners, toilet cleaners, descalers or acid-based tile cleaners on marble, kota, limestone or travertine. 

• Don’t use strong chemicals indiscriminately. Concentrated bleach, harsh alkaline degreasers and unsuitable cleaning agents can damage certain stone finishes, grout and protective treatments. Use only products approved for the specific stone and follow the stated dilution instructions. 

• Don’t scrub with steel wool, wire brushes or abrasive scouring powders. These can scratch polished stone and damage softer finishes. 

• Don’t flood stone floors. Water entering joints and the underlying installation can contribute to moisture-related staining and efflorescence, particularly where drainage or waterproofing is inadequate. 

• Don’t pressure-wash soft or layered stone at close range. Excessive pressure can erode the surface, damage edges and joints, or contribute to flaking. 

• Don’t mix cleaning products. Some combinations can release harmful gases, and the resulting chemical reaction may also damage stone or its finish. 

Stain removal guide 

Identify the likely stain before choosing a treatment. The wrong chemical can make a stain worse or damage the stone. Always test a treatment on an inconspicuous area first.

Stain / appearance  Typical cause  How to approach it
Dark, oily patch  Cooking oil, ghee or diya oil  Blot promptly and clean with a stone-compatible cleaner. For persistent oil stains, a baking soda and water poultice may help draw out the oil. Test first; stubborn stains may need professional treatment.
Yellow / orange mark  Turmeric, kumkum, curry or rust Clean promptly with a suitable stone cleaner. Identify the source: rust and organic/pigment stains may require different treatments. Avoid bleach or acids unless specifically approved for that stone.
Stain / appearance  Typical cause  How to approach it
Green / black growth  Algae, moss or other
biological growth outdoors
Use a soft brush and a cleaner approved for the stone. Improve drainage and reduce persistent dampness. Follow the product label for any biocidal treatment.
White powdery
deposit
Efflorescence or mineral deposits from hard water Dry-brush loose deposits and investigate moisture if they recur. Identify the deposit before selecting a remover; avoid acidic products on acid-sensitive stone.
Dull ring or patch  Etching from acidic drinks or cleaners Etching is surface damage, not an ordinary stain. Cleaning will not restore the finish; professional honing or re-polishing may be required.

Outdoor stone after the monsoon 

Months of rain can leave balconies, terraces, courtyards and garden paths with dirt, algae and moisture-related deposits. Before scrubbing, check drainage. Blocked outlets, inadequate slopes and persistent standing water can encourage biological growth and contribute to salt deposits. 

• Sweep away leaves and silt, then clear drains and outlets. 

• Clean green and black growth with a soft brush and a product suitable for the stone. Avoid acid-based moss removers on kota, limestone and other acid-sensitive stones. 

• Rinse or remove residues as directed by the cleaner manufacturer, then allow the stone to dry thoroughly. 

• Consider resealing porous outdoor stone only when it is sufficiently dry and the stone and sealer manufacturer’s instructions permit it. 

• Inspect joints and grout lines. Gaps can allow water into the installation and may contribute to recurring dampness or staining. 

Pressure washing should be used cautiously on outdoor stone. Even relatively durable stones can be damaged by excessive pressure, particularly around joints and edges. Use a soft brush wherever possible and consult the stone supplier before pressure washing. 

When the problem starts below the stone 

Some stone problems are not cleaning problems at all. Recurring white deposits, damp patches or discolouration may indicate moisture movement within the installation. 

Efflorescence occurs when water dissolves soluble salts present in the substrate, mortar, grout or other installation materials and carries them towards the surface. As the water evaporates, the salts are left behind. Moisture may enter through the bedding layer, substrate, groundwater, leaking services or external exposure. 

The right installation system can help minimise this risk. A suitable thin-bed stone adhesive, combined with proper substrate preparation, waterproofing where required, adequate adhesive coverage and appropriate drainage, can reduce moisture-related problems. The adhesive must be selected according to the stone type, application and site conditions. 

For more on choosing a fixing method for dense stone, read our guide to granite adhesive vs cement. The right method depends on the stone, substrate, format, location and installation requirements; no single fixing system is suitable for every application.

Your stone care routine at a glance 

Frequency  Recommended routine
Daily / as needed  Remove loose grit and dust; blot spills promptly.
Weekly  Damp-mop with a suitable diluted stone cleaner, following the product’s label and technical data sheet. For CLENZA Marble & Stone Cleaner, refer to the current TDS for dilution and surface-specific maintenance instructions.
Monthly / periodically  Clean high-traffic areas, kitchen edges and outdoor stone as needed. Check for recurring stains, deposits or dampness.
Periodically  Test whether the sealer is still repelling water and reseal only when required by the test and manufacturer’s guidance.

Explore the full MYK LATICRETE Stone Care and Cleaning Solutions ranges for products and guidance to help maintain the appearance of stone surfaces. 

Frequently asked questions 

1. What is the best way to clean natural stone floors? 

Remove loose grit regularly and damp-mop with a diluted, non-acidic cleaner that is approved for the specific stone. Blot spills promptly. Seal porous stone where appropriate, following the stone and sealer manufacturers’ guidance. 

2. Can I clean granite with vinegar? 

Granite is generally more resistant to household acids than marble or limestone. However, its mineral composition, finish and protective treatments can vary. Avoid vinegar as a routine cleaner and use a neutral, stone-compatible cleaning solution instead.

3. How do I clean kota stone? 

Kota is a limestone and should be treated as acid-sensitive. Sweep regularly, damp-mop with a suitable neutral cleaner and avoid vinegar, lemon juice, descalers and acidic tile cleaners. A suitable sealer may help reduce staining, depending on the stone’s finish and use. 

4. What are the white patches on my stone floor? 

White patches may be efflorescence—salts carried towards the surface by moisture—or mineral deposits from hard water. Dry-brush loose deposits and investigate the moisture source if they recur. Identify the deposit before choosing a cleaning treatment, and avoid acidic removers on acid-sensitive stone. 

5. Do all natural stones need sealing? 

No. The need for sealing depends on the stone’s porosity, finish, location and intended use. Many porous stones benefit from an appropriate penetrating sealer, while some dense, low-absorption stones may need little or no treatment. Sealing improves stain resistance; it does not make stone waterproof or acid-proof. 

6. Can I use a pressure washer on outdoor stone? 

Use caution. Excessive pressure can erode softer stone, damage slate’s layered structure, and weaken joints or edges—even on relatively durable surfaces. A soft brush and stone-compatible cleaner are usually the safer starting point. Check with the stone supplier before pressure washing. 

Care for stone starts with understanding the material. Choose the right cleaner, avoid unnecessary water and harsh chemicals, address moisture at its source and follow the guidance for any protective treatment. With the right routine, natural stone can retain its character and appearance for years.

Enquire Now