LATAPOXY® 300

It is a high-strength, chemical-resistant epoxy adhesive designed for fixing tiles and stones in demanding environments.

Thumbnail
LATAPOXY® 300

LATAPOXY® 300

It is a high-strength, chemical-resistant epoxy adhesive designed for fixing tiles and stones in demanding environments.

Colour: Grey & White

SKU:

Colour:
Grey & White

SKU:


Compliance:

certificate logo

EN 12004/ISO 13007:R2T

certificate logo

IS 15477: 2019: TYPE 5 T

Product Overview

LATAPOXY® 300 is a three-component epoxy thinset adhesive used for interior and exterior floor and wall installations. It is suitable for various substrates, including metal, concrete, wood and is designed for industrial, commercial and residential areas where high chemical resistance is required.

Latapoxy 300
Latapoxy 300

Features & Benefits

blue backgtound

1

Non-Flammable and Water Cleanable

Safe to use and easy to clean when fresh

blue backgtound

2

High Temperature and Chemical Resistant

Suitable for use in high temperature zones and resists chemicals

blue backgtound

3

Prevents Curling

Ideal for moisture-sensitive marbles and agglomerate stones

blue backgtound

4

Versatile Bonding

Bonds to various substrates, including metals

Product Details

Specifications

Packaging-
Net Weight: 5 kg Factory Proportioned unit consisting of three conveniently packed components - Hardener, Resin (Part A & Part B) and Filler
Coverage-
Varies in accordance with the size and type of the tile and stone installed
Colour-
Grey & White
Compliance-
EN 12004/ISO 13007:R2T
IS 15477: 2019 : TYPE 5 T
VOC: Very Low

Substrates Details

*Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

Substrates

Concrete MIVAN

Concrete MIVAN

Brick Masonry

Brick Masonry

Cement Mortar Beds

Cement Mortar Beds

Cement Plaster

Cement Plaster

Wood

Wood

Plywood

Plywood

Cement Terrazzo

Cement Terrazzo

Tiles

Tiles

Stones

Stones

Engineered Stones & Marbles

Engineered Stones & Marbles

Epoxy Resin Based Substrates

Epoxy Resin Based Substrates

Rubber, PVC, and Linoleum Substrates

Rubber, PVC, and Linoleum Substrates

Gypsum Wall Board

Gypsum Wall Board

Cement Backer Board

Cement Backer Board*

Substrates Details

*Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

FAQs

LATAPOXY® 300 epoxy adhesive is epoxy resin based thin set adhesive used for tile / stone installation in internal areas on dry wall boards, plastered surfaces, concrete, metals etc.

You can use LATAPOXY® 300, epoxy adhesive for internal and external (Covered) areas like residential, commercial,industrial floors, walls to install ceramic / vitrified/ glass mosaic/metal tiles and engineered marble/quartz stones, FRP based stone veneers etc.

No water should be mixed with this product. It is a resin based pre-packed thin set adhesive which has three components, namely Part A, Part B and filler powder Part C. Only these components should be mixed to make a thin set adhesive.

For installation of metal tiles on any substrate, we recommend using PUA 212® - The Versatile Adhesive.

The maximum size of tile/stone is 2400 mm X 2400 mm for installation with LATAPOXY® 300.

No. One can use PUA 212® for exterior tile/stone installation.

For natural stones, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.

There is no height restriction when you want to install tiles using LATAPOXY® 300.

If the engineered stones / agglomerates / Quartz stones have to be installed on floors, you should use LATAPOXY® 300. But the size of stones shall not be more than 900 mm X 900 mm. For sizes higher than this, we recommend using PUA 212®

You can use LATICRETE® cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series unsanded grout) mixed with LATICRETE® 1776 grout admix plus for filling these spaces (Grout joints) between tiles. You may also use SP-100™ Tile joint stain- free epoxy grout. For Industrial applications, use Industrial Epoxy Grout LATAPOXY® 2000.

Yes. This is an ideal product for industrial tile / stone installation on floors and walls (Internal). This product offers excellent chemical resistance to different chemicals like acids, alkalis etc. making this most suitable for industries like pharma, food, chemical etc. This is also most suitable for hospital operation theatres, pathology labs and clinical laboratories. For all these applications, one needs to use Industrial Epoxy Grout LATAPOXY® 2000, to fill the tile joints.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
Enquire Now