LATAFINISH® WALL PUTTY – COARSE FINISH
LATAFINISH® Wall Putty – Coarse Finish is made of white cement, polymers, carefully graded fine aggregates & biocides. It has to be mixed with water at the time of application.
LATAFINISH® – Coarse Finish is used to make uneven surfaces level and smooth and is designed for both interior and exterior surfaces.

Data Sheets LATAFINISH® – COARSE FINISH

Material Safety Data LATAFINISH® – COARSE FINISH

 

Features & Benefits

  • Easy to apply
  • Water resistance
  • Anti fungal
  • Good compressive strength
  • Good tensile strength
  • Covers undulations of plastered surfaces

Product Details

Packaging: 20 kg & 40 kg Coverage: LATAFINISH® Wall Putty covers approx. 10 to 11 sq.ft* per kg for 2mm thickness. The coverage depends upon the quality of base surface and surface evenness. Color: White Certification:
  • Not Mentioned
 
 

How to apply

Substrate: The Wall Surface to be applied with Wall Putty should be Smooth Cement Plaster (Cement: Sand preferably in the ratio of 1:6). Surface free from Structural Crack & having been cured for 28 days.. The surface should be free from dirt, oil, grease and other loosely adhered foreign materials. Surface Preparation:
  • The Cement Plaster Surface should be cured for 28 days to achieve proper strength before application of Wall Putty
  • The Surface should not have any Structural cracks. Any Non Structural Cracks to be treated first with appropriated crack filler before applying putty
  • Ensure the surface is cleaned from all the dust , grease & loose materials with the help of emery stone / putty blade/ wire brush together with clean water
  • Pre wet the surface before applying Wall Putty
  • IMPORTANT TO ENSURE THAT CEMENT PLASTER SURFACE SHOULD BE PRE WET TO SUCH AN EXTENT THAT IT SHOULD NOT ABSORB WATER FROM PUTTY COAT
Mixing: Place clean, potable water into a clean pail. Add LATAFINISH® Coarse Finish Powder. Use approximately 6 to 7 L of water for 20 kg of powder. i.e. Water to Powder ratio is 30 % to 35 %. Mix with a slow speed mixer to a smooth, trowelable consistency and free from lumps. Allow mixed putty to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized putty blades. Application:
  • Apply one coat of the above paste on to the substrate with the putty blades
  • The maximum thickness allowed in one application is 5 mm. Ensure that the second coat application should be done when the first coat is totally dried
  • The second coat can be done with either LATAFINISH® Smooth Finish Putty or Coarse Finish Putty
Areas of Application
  • Designed for interior and exterior surfaces
  • To make uneven surfaces to even and smooth surfaces
  Suitable Substrates
  • Not Mentioned