LATAFINISH® WALL PUTTY – FINE FINISH
This wall putty is a unique formulation of white cement and high performance chemicals and polymers which can be applied on damp as well as dry surfaces.

Data Sheets LATAFINISH® – FINE FINISH

Material Safety Data LATAFINISH® – FINE FINISH

Features & Benefits

  • White cement based Wall Putty
  • White, smooth & glossy finish
  • Does not allow paint to flake
  • Protects paint from moisture
  • Curing is not required
  • Ideal for interior & exterior walls

Product Details

Packaging 40 kg, 20 kg, 5 kg & 1 kg Coverage LATAFINISH® Wall Putty covers approx. 16 to 20 sq. ft. per kg for 2 coats, maintaining a maximum thickness of 1.5 mm on smooth plaster surface. Color White Certification
  • Not Mentioned

How to apply

Substrate: The Wall Surface to be applied with Wall Putty should be Smooth Cement Plaster (Cement: Sand preferably in the ratio of 1:6). Surface free from Structural Crack & having been cured for 28 days.. The surface should be free from dirt, oil, grease and other loosely adhered foreign materials. Surface Preparation:
  • The Cement Plaster Surface should be cured for 28 days to achieve proper strength before application of Wall Putty
  • The Surface should not have any Structural cracks. Any Non Structural Cracks to be treated first with appropriated crack filler before applying putty
  • Ensure the surface is cleaned from all the dust , grease & loose materials with the help of emery stone / putty blade/ wire brush together with clean water
  • Pre wet the surface before applying Wall Putty
  • Important to ensure that cement plaster surface should be pre wet to such an extent that it should not absorb water from putty coat
Mixing: Mix LATAFINISH® Wall Putty with around 35% of clean/potable water to make a paste of workable consistency . The mixing has to be done till a uniform paste is prepared. Once the paste is prepared it is left for 5 to 10 minutes before application to ensure complete reactions of admixtures present in putty. Mix only that much quantity of putty paste which can be used in 2 hours time. Application:
  • Clean & Pre wet the plaster surface before applying LATAFINISH® Putty
  • Make a LATAFINISH® Putty paste which can be used in 2 hours time
  • Apply the first coat of putty on pre wet surface from bottom to upward direction with putty blade
  • After drying of first coat of putty clean the surface with smooth dry cloth followed by wet cloth
  • Apply second coat of putty after about 3.0 hrs of first coat
  • Allow the surface to dry for minimum 12 hours
  • The Putty to be applied in two coats at a maximum thickness of 1.5 mm
  • Before paint application clean the putty surface for all the loosely adhered material and use very fine water resistant emery paper ( preferably more than 500 Nos) only if there are marks of putty blade on the surface
  • During application of putty the surface should be protected from direct sunlight till the two coats of putty are dried
Areas of Application
  • Designed for interior and exterior surfaces
  • To make uneven surfaces to even and smooth surfaces
  Suitable Substrates
  • Not Mentioned