LATICRETE® 325 Shear Wall Adhesive is a high polymer modified adhesive for fixing tiles and natural stone on interior and exterior floor & shear walls. Designed for interior floor and wall installations and external floor installations of all types of ceramic tile, vitrified tile, precast Cement terrazzo and natural stones over concrete and a variety of cement-based substrates, especially on low absorbent cement substrates like MIVAN/Shear Walls. Can be used up to maximum 15 mm bed thickness.”

Data Sheets LATICRETE® 325 SWA

Features & Benefits

  • Formulated for shear wall and low absorbent cementitious substrate
  • Can be used upto a bed thickness of 15 mm
  • High bond strength & resistance against shrinkage cracks
  • Single component - Just add water

Product Details

Packaging 50 kg Bag   Coverage Please refer the TDS Color Grey   Certification

  • ANSI: A 118.4 ET
  • EN: 12004/ ISO 13007: C2T
  • IS 15477 : 2019: TYPE 2 T Adhesive
  • VOC: Practically Nill

How to apply

Surface Preparation: All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Check the surface to be true to plumb. All slabs must be plumb and true to within ¼”(6mm) in 10 ft(3m). Rough or uneven concrete surfaces should be made smooth with LATICRETE® Screed/Plaster material to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened, and excess water swept off. Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28* days old before application. Mixing: Place clean, potable water into a clean mixing bowl. Add LATICRETE® 325 SW Adhesive powder into the mixing bowl. Use approximately 13.5L to 15L of water for 50 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Areas of Application Designed for interior floor and wall installations and exterior floor Suitable Substrate:

  • Concrete & Concrete Masonry
  • Mivan / shear walls
  • VDF / Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Brick Masonry
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Cement terrazzo*
  • Existing Natural Stone*
*Surface to be cleaned and roughened before installation of tiles or stones.