Frequently Asked Questions

LATAPOXY® 300 epoxy adhesive is epoxy resin based thin set adhesive used for tile / stone installation in internal areas on dry wall boards, plastered surfaces, concrete, metals etc.

You can use LATAPOXY® 300, epoxy adhesive for internal and external (Covered) areas like residential, commercial,industrial floors, walls to install ceramic / vitrified/ glass mosaic/metal tiles and engineered marble/quartz stones, FRP based stone veneers etc.

No water should be mixed with this product. It is a resin based pre-packed thin set adhesive which has three components, namely Part A, Part B and filler powder Part C. Only these components should be mixed to make a thin set adhesive.

Yes. For metal tile installation on any surface OR ceramic / vitrified/ glass mosaic tiles on Metal surfaces, this product can be used.

The maximum size of tile/stone is 1500mm X 1500mm for installation with LATAPOXY® 300. If you are installing tiles larger than this size ask MYK LATICRETE team member for a suitable thin set adhesive.

No. One can use LATAPOXY® 210 modified epoxy adhesive for covered areas only in case of exterior tile/stone installation. If the area is exposed to all environmental conditions, then it is not recommended to use this product.

Yes. When you want to install Natural stones with LATAPOXY® 300, seek advice from MYK LATICRETE team member as natural stones are of various types and have absorption which may create problems like staining of stones, ugly patches, picture framing etc.,

There is no height restriction when you want to install tiles using LATAPOXY® 300. For installation of tiles more than 100 ft height, please seek advice from MYK LATICRETE team member.

If the engineered stones / Agglomerates / Quartz stones have to be installed on floors, you should use LATAPOXY® 300. But the size of stones shall not be more than 900 mm X 900 mm. For sizes higher than this, contact MYK LATICRETE Team member for seeking advice.

You can use LATICRETE® cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series unsanded grout / LATICRETE® Aquashield) mixed with LATICRETE® 1776 grout admix plus for filling these spaces (Grout joints) between tiles. You may also use LATAPOXY® SP-100 stain free epoxy grout or SpectraLOCK® Pro premium grout. Seek advice from MYK LATICRETE Technical services for large areas grouting.