FAQs
You have to use LATICRETE® cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series unsanded grout / LATICRETE® Aquashield) mixed with LATICRETE® 1776 grout admix plus for filling these spaces (Grout
joints) between tiles.
No. It is mandatory to have spacing between the tiles when installed on external façade. The thermal movements are very high and spacers are must to accommodate such movements.
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
The maximum height is 50 ft when you want to install tiles using LATICRETE® 325 High Flex. For installation of tiles more than 50 ft height, we recommend using LATICRETE® 345 Super Flex.
Yes, you can install natural stones with LATICRETE® 325 High Flex. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 325 High Flex has the ability to accommodate such movements.
The maximum size of ceramic / vitrified tile for interior application is 1200mm X 1200mm and for exterior application is 600mm X 600mm. If you are installing tiles larger than this size, we recommned using LATICRETE® 335 Super Flex and higher.
For 20 Kg bag of LATICRETE® 325 High Flex, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
You can use LATICRETE® 325 High Flex for internal and external areas like residential floors & walls to install clay/ ceramic/ vitrified/ glass mosaic tiles.
LATICRETE® 325 High Flex is high polymers and cement based thin set adhesive which is mixed with water and used for tile installation in internal and external areas.