FAQs
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
The maximum height is 10 ft when you want to install tiles using LATICRETE® 315 Plus. For installation of tiles more than 10 ft height, we recommend using LATICRETE® 325 & above.
Yes, we can install small format natural stones using our LATICRETE® 315 Plus. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
Yes. But only for floor areas for external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 315 Plus has the ability to accommodate such movements in small format tiles when spacers are provided.
The maximum size of ceramic / vitrified tile is 600mm X 600mm for installation with LATICRETE® 315 Plus. If you are installing tiles larger than this size, we recommend using LATICRETE® 325
For 20 Kg bag of LATICRETE® 315 Plus, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
You can use LATICRETE® 315 Plus for internal floor & wall and external floor areas like residential floors, walls to install ceramic / vitrified tiles of sizes upto 600 mm X 600 mm
LATICRETE® 315 Plus is polymer based adhesive which is mixed with water and used for tile installation in internal floor & wall areas and external floor areas.
You can use LATICRETE® 9237 for internal and external wet areas like residential, commercial, Industrial floors and walls,swimming pools, Jacuzzi, sauna, wet areas, wash rooms, kitchens and water bodies where the tiles can be installed directly over the membrane.
You can use LATAPOXY® 300, epoxy adhesive for internal and external (Covered) areas like residential, commercial,industrial floors, walls to install ceramic / vitrified/ glass mosaic/metal tiles and engineered marble/quartz stones, FRP based stone veneers etc.
